Need handsets or headsets for your business?
We stock a wide range of hardware to make accessing your VoIP service even easier.
We have compiled a list of FAQs to help not only our new customers setup their services, but also for our current customers who are looking to configure some of our more complex features. Use the search box below to find answers to any questions or problems you might have.
If you are unable to find an answer to your query, please call us on: 0330 122 6000
SIP ALG is an Application Layer Gateway intended to provide protection to private IP addresses on a NAT'd (Network Address Translated) network. It's a "feature" that runs on a firewall and/or router. All good firewalls allow this "feature" to be turned off in their settings and good business grade routers like the Draytek series have it disabled by default.
In many cases it is poorly implemented and actually causes more problems than it solves. Yay.com and other VoIP providers regularly find that the SIP ALG modifies SIP packets in unexpected ways, corrupting them and making them unreadable. The symptoms of SIP ALG are:
SIP ALG doesn't always show it's colours straight away. Algorithms on firewalls will often be deciding at which point SIP ALG is to inspect your traffic, it could be on your first VoIP calls, it could be following a certain set pattern of traffic.
We regularly see particularly poor implementations on the giveaway routers that come with broadband connections and we would always recommend replacing them with a proper business grade router like the Draytek series to eradicate the problem all together. On the same giveaway routers, we sometimes even see SIP ALG continue to interfere with traffic despite being set to "off" on a router; the router clearly ignoring the instruction its been given.
Disabling SIP ALG To see if your router/firewall may be affected by SIP ALG, simply "Google" the make and model of your router/firewall followed by the words SIP ALG. Remember VoIP uses standard protocols, so we can assure you if its a problem for you and Yay.com, it will be a problem for many others. There will plenty of commentary on whether it can be disabled and if so what the steps are to do it. If you are able to disable SIP ALG, make sure you reboot the router immediately following its removal and then reboot each hardware phone / softphone on your network too. Thats vital so you can sure both SIP ALG has been disabled, but also that you devices have a fresh connection to our platform; so we know the correct way to reach you on your network.
Anything else I can try Some of our users have had some success combatting SIP ALG on some routers by encrypting both their SIP (Activating TLS) and RTP traffic (activating SRTP) on their devices. Not all hardware phones and softphones permit TLS or SRTP, but you could try looking for these settings on your phones and activating them on both your phone and in the Yay.com dashboard. Its easy to introduce more problems than you solve by doing this, so be sure to read this FAQ on encryption VERY carefully first.
View this video to learn more about SIP ALG and why you should consider disabling it on your router to improve phone call performance.