Yay.com loading

Loading

Call us on 0330 122 6020

VAT

0
Log in

Draytek HVE290 HDMI-over-IP Converter

Product Description

The Draytek HVE290 takes a HDMI input from your video device and converts it into an IP signal on standard CAT5e/CAT6 cable which can then be distributed by the V1281 switch.

The HVE290 comes as a pair (sender and receiver) additional receivers are available and are sold separately. For installation the sender unit would connect to your video source via HDMI and also into the V1281 via RJ45. The receiver unit would then connect back to your VigorSwitch V1281 and output to your screens via HDMI input.

The HVE290 is designed to maintain the frame rate in fast-moving scenes, particularly on large screens, making for a clear picture. The unit provides full HD, up to 36-bit colour and the ability to downscale and upscale when using one-to-many configuration that include screens with differing resolution.

The HVE290 is powered by AC/DC (included) but if the set up requires multiple sender units then a multi-output USB power supply may be preferred. If the TV at the receiving end provides sufficient power, then you can power the receiver from the TV, no PSU is needed at all, making for an all round tidy installation. USB DC units are available separately.

HVE290 Key Highlights

  • Companion device to VSV1281
  • Full HD, up to 1080P
  • Up to 36-bit Deep Colour
  • HDCP Passthrough & HDMI 1.3
  • Upscaling/Downscaling (auto or manual)
  • One-to-one or One-to-many (One-to-many requires the VSV1281)
  • UK power adaptor (BS1362 compliant)
  • 2 years Draytek warranty

What's in the box?

  • Draytek HVE290 set (sender & receiver)
  • UK power adaptor
Reduced & Clearance stock

Refurbished and ex-demonstration VoIP Phones, Wifi & Networking products

Reduced and Clearance Stock

FREE delivery on ALL orders

Similar Products

Related Products