Your shopping cart is empty
QoS is a feature that all Drayteks have that allow you to split your bandwidth and prioritise it to the features needed most. In the case of yay.com (and VoIP in general), you would allocate most of your bandwidth for VoIP, for example 50%, with the other 50% being allocated for other services such as video streaming and web surfing. This allows you to keep crystal clear VoIP calls, all while not using up the entirety of your bandwidth.
To setup a Draytek's Quality of Service settings, you'll first need to log into the interface. To do this, you'll need to find the IP address of your Draytek (the standard being 192.168.1.1), or you can use either of the two IP scanners listed below!
Advanced IP Scanner
LanScan for Mac
It is advised (as noted in the picture above) to run a speed test on your internet to get your speeds so that it can be adjusted correctly where needed. Each call over VoIP with us is 80kbs for every call both inbound and outbound. For example, if you had 3 calls happening at once, that would be 240kbs in total.
Once you have entered the ratios, hit OK and then you will have successfully configured Quality of Service!
13 September 2018
Connect your VoIP phones to your network even without a nearby network router. Powerline Adapters are an ingenious solution to extending your WiFi networks. Find out more.
13 February 2019
Easily reduce call abandonment rates and control the flow of calls to your team when you use call queuing with our cloud-based VoIP phone system.
16 January 2019
Introducing BYOD or Bring Your Own Device to your business can help enhance your business and bring increased flexibility and satisfaction to your workforce.